How to eliminate the faults often encountered in the use of belt slitting rewinder
For the paper processing industry, the belt slitter is a very important equipment, which is used almost every day. If there is a failure, it will hinder the production process and reduce the production efficiency. Therefore, the daily maintenance is necessary. This paper summarizes the following common faults for reference, hoping to help you:
First, the tape Slitter does not roll up. This situation is mostly due to the inapplicability of the paper core. As long as the paper core with the required inner diameter is replaced, in addition, the use of the winding roller in the winding process can also avoid uneven winding of the slitter.
Second, the meter count is not accurate. In this case, two wheels of the meter counting wheel can contact the feeding cot at the same time, and make a mark on the meter counting wheel. If the meter counting wheel is manually rotated for 5 turns, it will count for 1 meter, otherwise the meter counting wheel will be replaced.
Third, the trend of slitting and winding materials. This is mainly because the winding tension is not right, adjust the appropriate winding tension of the paper Slitter, and use the pressure roller for winding, and wrap the slitting material into the overpressure roller before entering the winding paper core.
